Info: '• ENSC Init is being activated, Troubleshooter can't be run properly, make sure LocalTalk is chosen, then press down the shift key while rebooting to deactivate ENSC Init, then try again.'
DITL_247.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• Troubleshooter detects this ENSC Adapter has a correct ID address. Click OK to continue the test. '
DITL_246.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• This ENSC adapter has a dupplicated ID address. Please return this card back to Asanté. We will make sure you will get a replaced card with correct ID address ASAP. Thank you . '
DITL_245.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• Troubleshooter detects this MacCon LC III Adapter has a correct ID address. Click OK to continue the test. '
DITL_244.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• This MacCon LC III adapter has a dupplicated ID address. Please return this card back to Asanté. We will make sure you will get a replaced card with correct ID address ASAP. Thank you . '
DITL_243.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• Non-Asanté driver exists in the memory. Please run Asanté EtherTalk Installer. Make sure localTalk is selected, hold down the shift key during restart. '
DITL_242.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• Virtual Memory is ON. Please turn OFF VM (Go to the Apple Control Panels, double-click on the Memory icon, then choose VM = OFF). Restart with the shift key down, then run troubleshooter again. '
DITL_241.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• EtherTalk Driver is active. Please switch to LocalTalk (Go to the Apple Control Panels, double-click on the Network icon, then choose LocalTalk). Restart with the shift key down, then run troubleshooter again. '
DITL_240.txt
Items: (3 entries)
0:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Exit'
1:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
2:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: '• EtherTalk Driver is active. Please switch to LocalTalk (Go to the Apple Control Panels, double-click on the Network icon, then choose LocalTalk). Restart with the shift key down, then run troubleshooter again. '
DITL_231_incorrect_data_size.txt
Items: (3 entries)
0:
Bounds: x1=104, y1=64, x2=164, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=88, y1=22, x2=238, y2=44
Type: -120
Info: 'Incorrect number !'
2:
Bounds: x1=17, y1=16, x2=64, y2=51
Type: -96
Info: ' '
DITL_230_choose_size.txt
Items: (4 entries)
0:
Bounds: x1=250, y1=45, x2=320, y2=65
Type: 4
Info: 'OK'
1:
Bounds: x1=17, y1=75, x2=151, y2=94
Type: -120
Info: 'Repeating number : '
2:
Bounds: x1=156, y1=77, x2=219, y2=90
Type: -112
Info: '10'
3:
Bounds: x1=17, y1=15, x2=223, y2=67
Type: -120
Info: 'Choose repeating number....Maximum number : 1000Minimum number : 10'
DITL_229.txt
Items: (4 entries)
0:
Bounds: x1=334, y1=97, x2=392, y2=117
Type: 4
Info: 'OK'
1:
Bounds: x1=261, y1=97, x2=319, y2=117
Type: 4
Info: 'Quit'
2:
Bounds: x1=14, y1=28, x2=46, y2=60
Type: -96
Info: ' '
3:
Bounds: x1=63, y1=7, x2=398, y2=92
Type: -120
Info: 'Running Asanté TroubleShooter will reinitialize your Ethernet adapter. Before continuing please make sure that the LocalTalk Driver is chosen. (Go to the Apple Control Panels, double-click on the Network icon, then choose LocalTalk).'